LondonKings: Tips & Tricks

SECRET Codes for iPhone and All SmartPhones in 2016

3:22 AM

This page contains a list of codes that can be entered into most Smartphones to retrieve important information run diagnostics and test the functionality of the device.
The codes below are primarily for Smartphones running on the Android Operating System but some codes listed will also work on basic phones and Smartphones that might not be built on the Android OS such as iPhones (iOS), Windows Phones, Nokia Phones (Symbian), etc. Some codes only work for specific manufacturers, some for specific versions of the operating system, some makes and models of phones just don’t like to work at all.

Disclaimer: This page is for educational and informative purposes only, and a few of these codes I wouldn’t recommend a basic or novice phone user to perform. Some of these codes can clear important information from your device if not already saved properly. So all in all, read the description of what the code is intended to do and perform these codes at your own risk because I will not be held responsible or accountable. Otherwise enjoy the codes and enjoy the article.

To input these codes on your phone all you have to do is open up your dialer as though you’re dialing a telephone number and then enter the code. After typing in the code the phone should pull up whatever option you’re testing. Some of these codes you might need to enter the code and then call/dial it.

*#*#4636#*#* or *#*#INFO#*#* can be used to check a lot of things on most Android Smartphones. Including:

Phone information -allows you to run a ping test, and shows a ton of interesting information about the phone.

Battery Information – now you can remove that power app you installed on your phone, all the common information you need about your battery and charging is here.

Battery Status: Shows whether the device is charging or if the battery is full.
Power Plug: Shows how the device is charging, AC (wall charger), USB (computer) etc.
Battery level: at what Percent the battery is charged.
Battery scale: should read “100”.
Battery Health: should say “Good”. If it shows “unknown” or “unknown error” then you should power cycle (turn the phone off than on) and check again. If it still doesn’t say good. Then the battery itself is likely defective.
Battery Voltage: really isn’t something the average phone user is going to need to worry about.
Battery Temperature: if your phones getting HOT you can check and see if it’s your battery that’s heating up or the phone itself.
Battery technology: usually just shows Li ion (because of the common Lithium Ion batteries found in the majority of these devices).
Time since boot: shows the amount of time since you last booted up or turned on the phone.

Battery History

Usage Statistics – shows the apps and programs that have been running on the device and can show how often they’re being opened and used.

*#7353# will access the Device Diagnostic Tool on Samsung phones and some other Smartphones excluding the HTC.
*#*#3424#*#* is how to open the Device Diagnostic Tool on an HTC Android phone.
*#06# shows the IMEI number of your phone. The IMEI is a unique 15 digit number for your specific phone, basically the Social Security number of your phone. Sometimes when typing in *#06# it will add an additional 2 digits at the end. The first 15 digits shown before any space or dash is your IMEI.
*2767*3855# is a code to perform a VERY THOROUGH complete wipe on a Samsung phone. Never type in this code until you backup your entire phone, it will not erase your Operating System or preinstalled applications. It will erase all personal data and settings. If you have tried to perform a Factory Data Reset on your Smartphone and it didn’t solve your issue then this code might be exactly what you’re looking for. PS also remove your SD card or Memory card from the phone before using this code.
*983*57# can be used to Factory Data Reset some Android devices, ZTE phones especially.
*#0*# will pull up the Device Diagnostic Tool on a Motorola Atrix that’s still using the Android 2.1 OS (Operating System).
#3282 or #DATA should show the data usage for Verizon phones.
*4 then hit 4 again to get to the menu for Sprint Customers.
*3282# or *DATA# to check data usage on AT&T phones.
*646# or *MIN# to check minutes on an AT&T cell phone.
#646 or #MIN Checks the current month's unbilled airtime usage on Verizon phones.
*225# Shows Bill Balance on AT&T mobile phones.
*729# accesses a Bill Pay option on AT&T Phones.
*639# can be used to check upgrade eligibility on an AT&T phone.
*#*#7780#*#* is an alternate code to perform a Factory Data reset on some Android Smartphones. Don’t do this unless you’ve backed up your phone so you don’t lose anything. Once you type in this code the phone will show the option to erase the memory on the device and provide the option to format the SD card as well. Note: In order to finish the reset you will have to tap the “Reset phone” button shown on the screen.
*#7380# is a soft reset code to restore the phones original factory default settings (just settings not a full clear) on Nokia mobile phones.
*#7370# is a hard reset on Nokia phones, this restores the whole phone, not just the settings, so make sure you do a backup first, if possible.
*#*#34971539#*#* this code can be used to get information about your phone’s camera. It shows following:

Update camera firmware in image (Don't try this option because it will most likely break your phone)

Get firmware update count

Get camera firmware version

Update camera firmware in SD card

*#1234# displays software/firmware information.
*#*#7594#*#* this code can be used to change the "End Call/Power" option on your phone. So instead of having to select the Silent mode, Air Plane mode or Power off, you can just use the power key to power the phone right off.
*#*#232339#*#* or *#*#526#*#* or *#*#528#*#* - Wireless LAN (WLAN) test. Just use the phones "Menu" button to start the various tests).
*#*#232338#*#* Shows the Wireless LAN (WLAN) MAC address WiFi and can show “power save mode Settings”.
*#*#273283*255*663282*#*#* will open a file manager of sorts where you can backup your media files such as Images, M3 (Sound), Video and Voice memos.
*#*#197328640#*#* opens a Service Mode where you can run various tests such as debugging the screen, gather version information etc.
*#*#1472365#*#* or *#*#1575#*#* will allow you to access a GPS test.
*#*#232331#*#* pulls up a Bluetooth test screen.
*#*#232337#*# Shows the Bluetooth Device Address.
*#*#7378423#*#* or *#*#SERVICE#*#* Sony Battery Health test
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate.
*#*#1234#*#* - PDA and Phone.
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number.
*#*#3264#*#* pulls up the RAM version.
*#*#2222#*#* shows the FTA HW Version.
*#*#1111#*#* shows the FTA SW Version.
##21# will cancel your phones registration from your service provider and should allow you to connect to the closest tower in your area. Once you type in the code you will have to actually call it, it will show a message and then go through… try and make a call or two and see if the service has improved. If yes enjoy, if not then power cycle your phone (turn it off and then back on). I don’t usually recommend this code be used unless you’re having pretty constant network related issues. If for some reason you have minimal service after entering this code and you have tried restarting your phone then you might have to contact your wireless provider to get them to reconnect you to the network (which power cycling should do for you), just call in and let them know that you suddenly had no service, should be one of the standard things they check for service related issues, just have them send an OTA (Over The Air Activation) to your phone (so far only confirmed on AT&T phones).
*#*#0283#*#* can check the Packet Loopback for networking.
*#*#0*#*#* - run a LCD test on your screen.
*#*#0673#*#* OR *#*#0289#*#* is how you run a Melody test for checking the sound. I believe this one is for the external speaker (the speaker that plays music on the phone).
*#*#0842#*#* Device test (vibration test and back light test).
*#*#2664#*#* Touch Screen test for if you think you might have dead spots or areas that don’t respond on the screen.
*#*#2663#*#* to show the Touch Screen version.
*#*#0588#*#* is a Proximity Sensor Test. The proximity sensor is a small little sensor, usually on the top of the phone next the logo or speaker you hold up to your ear, and its purpose is to know when you put your phone to your ear, so that the phone will lock, and you won’t accidently press keys when talking to other people. It then is supposed to realize when you’re removing your phone from your ear so that it can show the display again. If your phone is remaining on a black screen and you’re having issues ending calls then it could be your proximity sensor.
*3001#12345#* opens a Field Test on iPhones. You’ll have to press dial/call for this code to go through. This code opens a lot of different options to go through and see how well or efficiently your iPhone is working. One such future shown includes your phones signal. After typing this code into the phone the signal bars actually turn into a number. The lower the number the worse your signal strength is. Remember the number is a negative so -90 is a worse signal strength on your phone than a -80. Using this code can access a ton of technical information on an iphone, once done going through what you want then just press your home key to exit the Field Test.
*777# then call/dial, should open the account balance on a prepaid iPhone.
*#61# can be used to check the number for unanswered calls on iPhone. Use the code *#62# if you don’t have any service currently available. *#67# if the iPhone is busy.
*#21# provides information on call forwarding options.
*#119# or #*119# is supposed to help take a phone out of Emergency Mode. (submitted by a Sprint employee)
*#30# should show whether the phone has the setting to display its caller ID field enabled or disabled (I have yet to confirm this code. I think it is primarily for iPhones). *#76# is a similar code.
*#33# can be used to check for call control bars on an iPhone.
*#43# shows whether call waiting is enabled or disabled on iPhone.
I hope you enjoyed the article and saw some interesting codes that you can use on your phone. If you didn’t see any that you know of and have tried and confirmed yourself then let me know in the comments below. Don’t forget to include the Star Code and what the code actually does in the comment.
I look forword to hearing what you have to say. And don’t forget to check the site for other fun and interesting articles. Enjoy and I look forward to hearing from you.

HELLO FRNDS .... .
TODAY I AM SHARING VERY AMAZING TRICKS FOR IPHONE USERS...
. .
Secret Hacking Codes for iphone
1. *#43# Use to verify if call waiting is enabled .
2. *#61# Verify the number for unanswered calls .
3. *3282# Get your data usage information.
4. *729 # Options to make payments. Its operator specific.
5. *#62# Verify the number for call forwarding if no service is available.
6. *#67# Verify the number for call forwarding if phone is busy.
7. *#33# To verify whether barring is enabled or disabled for outgoing .
8. *#21# To display the settings for your call forwarding .
9. *3001#12345# Enters Field mode which allows you to access most of the hidden settings and functions of your iPhone.
10. *#30# This shows whether you have enabled or disabled the presentation of the calling line, presumably the number of the party placing the call.
11. *#76# State whether the connected line presentation is enabled or disabled. Similar to the calling line presentation.
12. *#06# Display the IMEI of your iPhone, as always this is the standard code for all brands of phones.

Google

How to Search in Google: 30 Advanced Google Search Tips & Tricks

11:18 PM

If you’re like me, you probably use Google many times a day. But chances are, unless you're a technology geek, you probably still use Google in its simplest form. If your current use of Google is limited to typing in a few words and changing your query until you find what you’re looking for, then I’m here to tell you that there’s a better way -- and it’s not hard to learn.

On the other hand, even if you are a technology geek and can use Google like the best of them already, I still suggest you bookmark this article of advanced Google search tips. Then, you’ll then have the tips on hand when you're ready to pull your hair out in frustration watching a neophyte repeatedly type in basic queries in a desperate attempt to find something.

The following advanced Google search tips are based on my own experience and things that I actually find useful. I’ve kept the descriptions of the search tips intentionally terse, as you’re likely to grasp most of these simply by looking at the example from Google anyway.

30 Google Search Tips to Search Google Like an Expert

1) Explicit Phrase

Let's say you're looking for content about inbound marketing. Instead of just typing inbound marketing into the Google search box, you will likely be better off searching explicitly for the phrase. To do this, simply enclose the search phrase within double quotes.

Example Search: "inbound marketing"

2) Exclude Words

Let's say you want to search for content about inbound marketing, but you want to exclude any results that contain the term advertising. To do this, simply use the - sign in front of the word you want to exclude.

Example Search: inbound marketing -advertising

3) This OR That

By default, when you conduct a search, Google will include all the terms specified in the search. If you're looking for any one of one or more terms to match, then you can use the OR operator. (Note: The OR has to be capitalized).

Example Search: inbound marketing OR advertising

4) Words in the Text

If you want to find a webpage where all the terms you're searching for appear in the text of that page (but not necessarily beside each other), type in allintext: followed immediately by words or phrases.

Example Search: allintext:vermont ski house lake

5) Words in the Text + Title, URL etc.

If you want to find a webpage where one term appears in the text of that page and another term appears elsewhere on the page, like the title or URL, then type in that first term followed by intext: followed immediately by the other term.

Example Search: neil diamond intext:red sox

6) Words in the Title

Want to find a webpage with certain words contained in the title (but not necessarily beside each other)? Type in allintitle: followed immediately by words or phrases.

Example Search: allintitle:wine club

7) Words in the TItle + Text, URL, etc.

Want to find a webpage where one term appears in the title of that page and another term appears elsewhere on the page, like in the text or the URL? Type in that first term followed by intitle: immediately followed by the other term.

Example Search: flu shot intitle:advice

8) Words in the URL

If you want to find pages with your search query mentioned in the URL, type allinurl: immediately followed by your search query.

Example Search: allinurl:hubspot blog

9) How to Search Within a Website

Often, you want to search a specific website for content that matches a certain phrase. Even if the site doesn’t support a built-in search feature, you can use Google to search the site for your term. Simply use the site:somesite.com modifier.

Example Search: site:www.smallbusinesshub.com "inbound marketing"

10) Related Search

If you want to find new websites with similar content to a website you already know of, use the related:somesite.com modifier.

Example Search: related:visual.ly

11) A Page That Links to Another Page

Let's say you want to search for every website that cites a BuzzFeed article on their website. To do this, use the link: command, immediately followed by the name of a page. Google will give you all pages that link to BuzzFeed's official website. The more specific the URL is, the fewer, more pointed results you'll get.

Example Search: link:buzzfeed

12) Similar Words and Synonyms

Let’s say you want to include a word in your search, but also want to include results that contain similar words or synonyms. To do this, use the ~ in front of the word.

Example Search: "inbound marketing" ~professional

13) Word Definitions

If you need to quickly look up the definition of a word or phrase, simply use the define: command. You can listen to the word's pronunciation by pressing the megaphone icon.

Search Example: define:plethora

14) Missing Words

Ever forgotten a word or two from a specific phrase, song lyric, movie quote, or something else? You can use an asterisk* as a wildcard, which can help you find the missing word in a phrase.

Example Search: much about nothing*

15) News in a Specific Location

If you're looking for news related to a specific location, you can use the location: command to search Google News for stories coming from that location.

Search Example: star wars location:london

16) Specific Document Types

If you’re looking to find results that are of a specific type, you can use the modifier filetype:. For example, you might want to find only PowerPoint presentations related to inbound marketing.

Example Search: "inbound marketing" filetype:ppt

17) Translations

Want to translate a simple word or phrase from one language to another? No need to go to a translation website. Just search translate [word] to [language].

Example Search: translate krankenwagen to english

18) Phone Listing

Let’s say someone calls you on your mobile number, and you don’t know who it is. If all you have is a phone number, you can look it up on Google using the phonebook feature.

Example Search: phonebook:617-555-1212

(Note: The number in this example doesn't work. You’ll have to use a real number to get any results.)

19) Area Code Lookup

If all you need to do is to look up the area code for a phone number, just enter the three-digit area code and Google will tell you where it’s from.

Example Search: 617

20) Zip Code Lookup

If you need to look up the zip code for an address, simply search for the rest of the address, including town or city name and state, province, or country. It'll return results with an area code (if applicable),

Example Search: 25 First St., Cambridge, MA

21) Numeric Ranges

This is a rarely used but highly useful tip. Let’s say you want to find results that contain any of a range of numbers. You can do this by using the X..Y modifier (in case this is hard to read, what’s between the X and Y are two periods). This type of search is useful for years (as shown below), prices, or anywhere where you want to provide a series of numbers.

Example Search: president 1940..1950

22) Stock (Ticker Symbol)

Just enter a valid ticker symbol as your search term, and Google will give you the current financials and a quick thumbnail chart for the stock.

Example Search: GOOG

23) Calculator

The next time you need to do a quick calculation, instead of bringing up the Calculator applet, you can just type your expression into Google.

Search Example: 48512 1.02*

24) Tip Calculator

Along with a normal calculator, Google has a built-in tip calculator. Just search tip calculator and you can adjust the bill, tip %, and number of people splitting it.

Search Example: tip calculator

25) Timer

Don't have a timer handy? Google has you covered. Just type in an amount of time + the word "timer," and the countdown will begin automatically
Search Example:

Search Example: 20 min timer

26) Stopwatch

Search "stopwatch" and it'll bring up a stopwatch for you to start when you're ready.

Search Example: stopwatch

27) Weather

Next time you're looking for quick weather stats or a forecast for a certain area, search for weather followed by a location. Google will give you both before the first search results.

Search Example: weather cambridge ma

28) Sunrise & Sunset Times

If you're curious when the sun will rise and set that day at a specific location, do a simple Google search with the word sunrise or sunset along with the location name.

Search Example: sunrise acadia

29) Flight Statuses

If you type in the airline and airplane number into Google, it will tell you the flight information, status, and other helpful information.

Search Example: BA 181

30) Sports Scores & Schedules

Want to know the latest sports scores and future schedules of your favorite teams or match-ups? Search a single team name or two team names and Google will use Google Sports to spit out scores and schedules before the first search results.

Search Example: manchester united

Adsense

How to Report Invalid Clicks to Adsense

5:08 AM

There are some crazy people out there who click Adsense Ads madly. Obviously they are not trying to increase your revenue, but try to ban you from Adsense. I’ve faced these issues several times. When I saw Adsense click bombing for the first time, I was very scared about getting banned. However I found a way to report Google Adsense team about invalid clicks.

Whenever you get a lot of clicks from one user, Google will understand someone is trying to manipulate your Adsense account. Though Adsense credits the fraud clicks revenue on estimated earnings initially, it will be discredited once they detect it as fraud. You needn’t to freak out over invalid click as Google can detect that. But I always suggest you to report Google Adsense Team whenever you find some strange activity on Adsense. It’ll let you sleep easy.

However, if you clicked your own Adsense ads accidentally, you needn’t to notify Adsense about that click.

How to Notify Google About Invalid Clicks

First of all, it isn’t compulsory to report Google about fraud clicks. But if you want to stop worrying about getting banned, then you may consider contacting with Adsense Team. After all, it could be a reason for getting banned from Adsense.

To notify Adsense about invalid clicks, you’ll need to fill out the Invalid Clicks Contact Form.

Just enter your Name, Email Address, Publisher ID, Your Site URL, Select a Topic, Date and Time of the click activity.

It also asks for describing why those clicks seem invalid to you and to indicate suspicious IP addresses, referrers or requests. If you don’t have any description or data to put there, just leave it blank and click on ‘Submit’ button.

That’s it. You are done!

Hope it helps. Once again, it isn’t obligatory to report Adsense about invalid clicks. But if you want to be on safe zone, you can do that. If you find this post useful, like us on Facebook to get regular updates.

Share this post on G6, Twitter, Facebook or any social media, So many users can get help.

Android

Trick to Make Smartphone a Wireless Mouse or Keyboard

1:16 PM

As the title says, today I am going to share a trick about how to make smartphone a wireless mouse or keyboard for your laptop. Not only smartphone, you will also be able to turn your iPad in to a wireless mouse or keyboard and can control it from a comfortable place which is suitable for you.
I also did not know the trick but as it says “Necessity is the mother of invention”, though I did not invent anything, but I was able to find the trick. I use my laptop to watch movie or TV show connecting it to a TV via HDMI cable. I enjoy the shows or movies from couch. But this is really annoying to get up every-time when you want to make any change. Because you will have to use your keyboard and mouse of your laptop to change anything you want. So, I was planning to buy a Bluetooth keyboard. But something clicked into my mind and I started searching for a solution and within short time my best friend Google, gave me the absolute solution.

How to Make Smartphone a Wireless Mouse or Keyboard:

Let me describe you how we can turn our iPhone, Android phone or iPad in to a wireless mouse or keyboard. This is very simple using an app named Air Keyboard. Using this app you can control your MAC, Windows PC or Laptop from a remote place. There is a mouse pad and a keyboard inside this pad. So, you can use it as a mouse and also a keyboard. Using is simple and easy!

The app is absolutely free for iPhone and any Android phone. Follow the below steps to turn it on your device:

You can download the app for Android device from here. If you are using an iPhone, you can download it from this link.
To work with this app, you will have to install it in your computer and also will have to install it in your mobile device. For the computer version, you can download it from here.
Download the app setup in your computer and install it. Then open it in your computer.
Now, download the app in your mobile device and then install it. If you open the app, you should get your computer in the drop-down list.

Make_Smartphone_a_Wireless_Mouse_or_Keyboard_1

Connect to your computer and start using your wireless keyboard and mouse.

Make_Smartphone_a_Wireless_Mouse_or_Keyboard

If you face any problem about installing the software or you have any question about operating system, you can refer to this page.

Please let me know via comments whether you have enjoyed the app or not. If it is helpful for you, share it with your friends.

Blog Tips

How to Do SEO for BlogSpot Blogs

10:45 AM

Two famous ways for blogging and one is BlogSpot and another is WordPress. BlogSpot is for the beginners and WordPress is for the advance bloggers. Search Engine Optimization is must to rank your keywords and increase traffic for your website. What SEO do is to rank your keywords on Google and it works when someone searches with the keyword. Google SEO algorithm follows about 60-70 percent for On Page SEO that means on site SEO.

Optimize Post Title In BlogSpot:

Here I am talking about the page title for each article which you can see alongside favicon on the browser tab. Normally it shows like “Blogging Tips: How to Add Favicon on BlogSpot” something like this and this is not SEO friendly at all. It will be good if it only shows the page title and it is possible. To do that, you have to go to Template and then Edit HTML. Find the code “<title><data:blog.pageTitle/></title>” and then replace the code above “<b:if cond=’data:blog.pageType == “item”‘>

<b:else/>

<title><data:blog.pageTitle/></title> </b:if>”

Now save template and its done.

Custom Permalink:

You can change your permalink structure by yourself. Good permalink structure is using (-). Example: Page-Title-For-Your-Article. There will be two options. One is to automatically generate your permalink structure and another is to create custom permalink. You can edit your permalink by clicking “Custom Permalink” option.

Adding Site Description:

Your website description is must for good SEO. You can setup your site Meta description by going settings and then click “search preferences”. Under “Meta Tag” you will find description that is by default disabled. Click on “edit” and then select “yes”. Then type your desired Meta description including your keyword. Done……….

Now you can add Meta description for each article. You can find it at right side under “search description” when composing your article.

Custom Robots.txt Setup:

This is very important for your site. This will help your site index. So you need to setup a rule that how the Google bot is going to index in proper way. If you do any fault with this then it will harm your site. You have to type some text like below:

User-agent: Mediapartners-Google

Disallow:

User-agent: *

Disallow: /search

Allow: /

Sitemap: http://example.blogspot.com/feeds/posts/default?orderby=UPDATED”

You can find description of this code on Google search and then try your own text. You have to go to settings and then search preferences. Under “crawler and indexing” you will find an option “Custom robots.txt”. Click on “Edit” and then select “yes”, now you paste the text rules for the Google bot.

Sitemap:

It’s very important to generate a sitemap for your site. Sitemap helps Google bot to crawl isolated pages from your website. Its vey useful and must have for every website.

Image Optimization:

Image search plays very important role to increase your website visitor and revenue. Proper image optimization helps a lot. Proper use of alt text in image using keywords with appropriate rules makes your site SEO friendly.

Name of the image should be “your-image-name-with-keyword-variation.jpg”
Do not do keyword stuffing
Use long tail keywords for image name and alt text.
Use different but similar keywords in alt text for more than one image in single article.

Some Drawback of BlogSpot in terms of SEO: Here is the problem with BlogSpot and that is BlogSpot is not SEO friendly as WordPress. Some are below:

You Will Have Permalink Structure Problem:

Permalink structure is not SEO friendly. There will be a format like yourwebsite.com/year/month/page-title, which is not SEO friendly at all. Google I guess may not solve this problem in future.

Page Title And Meta Title Will Have To Be The Same:

Your page title and Meta title will be same. It will be good if the page title and Meta title is different. There is no solution until now and hopefully Google will solve it in future.

There Will Be No Subcategory:

You can only create Label/category but you cannot create subcategory under a Label/Category. This is a major issue and it will hurt your sites navigation problem and decrease your page views. I did not find any solution for this that I can share with you.

Image Uploading Problem:

If you upload an image then it will not saved as your website address

Uploading image is must but in BlogSpot if you upload an image, it will be saved in another Google website. This is another major issue, which is not SEO friendly. You can solve this problem by uploading your image in github under your subdomain and then add it to your BlogSpot to make it SEO friendly.

BlogSpot is appropriate platform for the one who is entry-level blogger. It will help them almost many things to do blogging and earn with that. Google have plans for this platform with good features in future. Its free, uses Google cloud, which is safe from hackers. Google products like Google plus, Google Page Speed and others are usable in this platform.

Adsense

Show Google Page Level Ads on Blogger Blogs – Killer Trick!

9:39 AM

Those who are using Google Adsense to monetize their blogs, they already know about Google Page Level Ads. But for those newbies, who do not know about Google Page level ads I am going to explain the topic in brief. Google page level ads are specially designed for mobile devices. If you have used any Android or iOS app, it will be easier for you to get the idea about Google page level ads. The page level ads will be similar to those app ads. There are two kinds of Google page level ads: 1. Anchor/Overlay Ads 2. Vignette ads. The anchor ads will show on the lower part of the mobile device screen. If any user wants to close it, he or she will be able to close it by clicking on the x button.

The Vignette ads are the ads which will cover the whole screen of the mobile and these ads are the ads which will give you maximum revenue. These ads are also user friendly and users will be able to close it just by clicking on the x button.

How to Show Google Page Level Ads on Blogger Blogs?

Whether you will believe it or not, there is no clear instruction to show Google page level ads on Blogger blogs. If you log in to your Google Adsense Dashboard, you will find the notification from Google Page level ads.

If you click on “Try it out”, it will give you the option to enable the ad types that you want to display in your blog.

Once you enable the ads, in the next step you will get the instruction to get the ad code and insert it in your blog. But here is the confusion!!

The above instruction tells you to insert the code inside your <head> tag of your blog. But it will not simply work if you insert it in your Blogger blog. Rather you will get an error message “Attribute name “async” associated with an element type “script” must be followed by the ‘ = ‘ character.”

This is kind of wired! So, what is the solution??

Yeah, I just want to make sure that I came up with a solution after some research and I am showing Google Page level ads in all my Blogger blogs. You can see below, 3 of my Blogger blogs showing Google Page level ads:

First thing that came into my mind is, the Blogger code is in html format but the Adsense ad code is java script. So, I started thinking how can I add this java script in my Blogger blog?
Then the idea came into my mind. I have added one HTML/JavaScript Widget in my blog layout and inserted the code into that Widget and it worked!!! Yeah!!!

Note: Please make sure, your Google adsense account is associated and added with your blogger account. You can simply check this by going to your Blogger Dashboard >>Earning >>Adsense>> and enable “Show ads on blog”. Also make sure, at least you are showing one ad using this feature. If you have confusion, you can read the article:

How to Show Google Ads on Mobile Version of Blogger Blog

LondonKings

SECRET Codes for iPhone and All SmartPhones in 2016

How to Search in Google: 30 Advanced Google Search Tips & Tricks

30 Google Search Tips to Search Google Like an Expert

1) Explicit Phrase

Example Search: "inbound marketing"

2) Exclude Words

Example Search: inbound marketing -advertising

3) This OR That

Example Search: inbound marketing OR advertising

4) Words in the Text

Example Search: allintext:vermont ski house lake

5) Words in the Text + Title, URL etc.

Example Search: neil diamond intext:red sox

6) Words in the Title

Example Search: allintitle:wine club

7) Words in the TItle + Text, URL, etc.

Example Search: flu shot intitle:advice

8) Words in the URL

Example Search: allinurl:hubspot blog

9) How to Search Within a Website

Example Search: site:www.smallbusinesshub.com "inbound marketing"

10) Related Search

Example Search: related:visual.ly

11) A Page That Links to Another Page

Example Search: link:buzzfeed

12) Similar Words and Synonyms

Example Search: "inbound marketing" ~professional

13) Word Definitions

Search Example: define:plethora

14) Missing Words

Example Search: much * about nothing

15) News in a Specific Location

Search Example: star wars location:london

16) Specific Document Types

Example Search: "inbound marketing" filetype:ppt

17) Translations

Example Search: translate krankenwagen to english

18) Phone Listing

Example Search: phonebook:617-555-1212

19) Area Code Lookup

Example Search: 617

20) Zip Code Lookup

Example Search: 25 First St., Cambridge, MA

21) Numeric Ranges

Example Search: president 1940..1950

22) Stock (Ticker Symbol)

Example Search: GOOG

23) Calculator

Search Example: 48512 * 1.02

24) Tip Calculator

Search Example: tip calculator

25) Timer

Search Example: 20 min timer

26) Stopwatch

Search Example: stopwatch

27) Weather

Search Example: weather cambridge ma

28) Sunrise & Sunset Times

Search Example: sunrise acadia

29) Flight Statuses

Search Example: BA 181

30) Sports Scores & Schedules

Search Example: manchester united

How to Report Invalid Clicks to Adsense

How to Notify Google About Invalid Clicks

Trick to Make Smartphone a Wireless Mouse or Keyboard

How to Make Smartphone a Wireless Mouse or Keyboard:

The app is absolutely free for iPhone and any Android phone. Follow the below steps to turn it on your device:

How to Do SEO for BlogSpot Blogs

Show Google Page Level Ads on Blogger Blogs – Killer Trick!

How to Show Google Page Level Ads on Blogger Blogs?

About Me

recent posts

Blog Archive

Example Search: much about nothing*

Search Example: 48512 1.02*